If you would like to minimize you Fiero's down time, you'll notice that quite a bit of the following items can be done to the new engine before you take your Fiero apart. Install the Flywheel and the engine/trans. Adapter plate and you can bolt on the clutch. Install the alignment pins into the adapter plate, these will ensure the proper alignment of the engine/trans. Assy..
---------------------------------------------------------------------------------------
Install the Morosso p/n 23770 to the engine. Now you can trial fit the starter & get the starter drive gear adjusted properly.
-----------------------------------------------------------------------------------------
You can install the oil line as per the instruction video and final mount the starter.
------------------------------------------------------------------------------------------
Install the T/O bearing in the transmission and mount the transmission to the engine adapter plate.
----------------------------------------------------------------------------------------------
Bolt the Front Motor mount onto the engine, install the Harmonic Balancer Pulley
--------------------------------------------------------------------------------------------