---

1) Introduction

2) Removal of the stock Fiero engine
    Removal of the stock Fiero engine (part 2)
    Removal of the stock Fiero engine (part 3)

3) Disassembly of the original engine from the cradle
    Disassembly of the original engine from the cradle (part 2)

4) Prepare the cradle and engine compartment for the V-8
    Prepare the cradle and engine compartment for the V-8 (part 2)

5) Installing the new engine onto the engine cradle
    Installing the new engine onto the engine cradle (part 2)
    Installing the new engine onto the engine cradle (part 3)
    Installing the new engine onto the engine cradle (part 4)
    Installing the new engine onto the engine cradle (part 5)

6) Modifying the wire harness for carb. and fuel injection

7) Final installation of the engine into the car
    Final installation of the engine into the car (part 2)

8) Cooling system connections

9) Testing


V-8 Conversion Information | V-8 Conversion FAQ
Customer Cars | Archisms

Back to the Homepage