While you are lowering this assy. You will want to do it slowly continually checking to be sure that you have dis-connected everything. At this point you can remove the remaining nut at the tops of the struts and lower the suspension until the "A" arm can support the strut.
Lower the assy. Out of the car and down onto a dolly or wooden floor creeper.
-----------------------------------------------------------------------------------------
Roll the assy. Out from under the car thru the right side wheel opening. Then you can reposition the overhead hoist or the "cherry picker" to pick up the cradle assy. And place it on a strong workbench. I use 2 saw horses nailed together with a pair of 2x4's. You will do most of the disassembly and re-assembly here.
----------------------------------------------------------------------------------------
You can now remove the struts/spindles/axles from the cradle assy. And set them aside.
-------------------------------------------------------------------------------------------